Next, under the select step, select the router’s link, which could also be labeled with the router’s MAC address, you can also find the address printed on your router. After this, click on settings, applications, pinholes, firewall, etc. Start your connection with the gateway with the help of ethernet or wifi and then you can bring the control panel by using the IP address into the browser. This will also prevent any issues from occurring if you are using a few internet applications. Even if you can access the internet on the router, you should also configure the firewall and connect your router directly to the wifi. The router you have must receive the usual IP address from the network of the gateway. The power cord also needs to be plugged inside the wall. Next, you could plug your router by connecting your cable to the router’s port and the other one to the other ports of the gateway. If you still prefer to make changes, log into the control panel of the router by simply entering your IP address inside the browser and then find the LAN settings or network. After this, you can click directly on the details button. If you want to check the IP address and plug in some subnet, make sure to connect after you have opened the network connection status in the window. In case the router is within the same subnet, you will need to change to another network before you connect it to the gateway. If there’s a wireless router of your own, ensure it doesn’t interfere with the gateway.